top of page

Set of 1-seat student`s table without adjustment of angle of inclination of table top, height groups No. 3-6 + T-shaped chair with HPL coating, height-adjustable, No. 3-6

Dimensions of the table: 700х500х580-760 mm. Weight: 10,2 kg.

The table consists of an ergonomic table top (rounded corners on 4 sides) and a screen with a shelf between metal frames. A hook is attached to the side rack of the frame. The tabletop contains a hole for a glass with stationery and a pencil case, and also has an antiscoliosis cutout.

Overall dimensions of the table:

●    width – 700 mm;
●    depth – 500 mm;
●    height – 580, 640, 700, 760 mm.

Wooden parts of the table are made of laminated chipboard of 16 mm thickness. The edges of all wooden elements are finished with PVC edge tape of the following thickness:

  • screen – 0,5 mm;
  • shelf – 1,0 mm;
  • table top – 1,0 mm.

Metal parts of student`s table are made of flat-oval tubes 50х30х1,2 mm, 38х20х1,2 mm, 30х15х1,2 mm in size and of round tubes 25 mm and 32 mm in diameter and also have a protective decorative coating - powder enamel. The height of the table is adjusted using screws through the holes of the frame and the legs, between which a plastic adapter sleeve is installed. Plastic tips are fixed on the ends of the frame to prevent injury to students and damage to the floor.

Chipboard color: milky oak, beech, grey.

Frame color: green (RAL6018), grey (RAL7035), yellow (RAL1018).

Dimensions of the chair: 385х435х700-820 mm. Weight: 4,59 kg.

Seat back size – 380х200 mm;

Seat size – 380х350 mm.

The chair can be adjusted in height: 340 mm (№3), 380 mm (№4), 420 mm (№5) and 460 mm (№6). It consists of overlaid seat, seat back and metal frame. The seat and the seat back are made of sloping-glued plywood of 8-9 mm thickness and are covered with  HPL plastic of 0.4-0.5 mm thickness. The edges of the seat and the seat back have a radius of rounding to prevent injury. Metal frame is made of round tubes with diameter 25 mm and 32 mm. The seat back and the seat are fixed to the frame with the help of screws and nuts. Height adjustment of a chair is carried out with the help of screws and holes on the frame. The frame is covered with powder paint.  Height adjustment is implemented through end-to-end nut-screw stitching with fixation of cover nut inside the tube for impossibility of unscrew in the course of  shattering. Plastic caps are fixed at the ends of the frame to prevent injury to students and damage to the floor. In the places of height adjustment there is a plastic transition sleeve, which ensures smoothness of adjustment, eliminates creaking and scratches while height  adjustment. Fixation of seats and seat backs to the frame of chairs is implemented with the help of screws of special mushroom-type form and nuts of rounded form, which prevent injury and damage to the clothes. On the lower part of metal frame there is hole through which a marking of height groups can be seen, while adjusting the height of the chair. Color marking in accordance to the height groups is applied in the form of a circle not less than 10 mm. Also the scale of marking of height groups is applied on the metal frame with the help of laser engraving.

Frame color: green (RAL6018), grey (RAL7035), yellow (RAL1018).

HPL color:  beech, milky oak, grey.

Set of 1-seat table No. 3-6 + t-shaped chair with HPL coating

SKU: 31180+32182HPL
₴3,159.00Price
Frame color
Chipboard color
HPL color
    bottom of page