et of 1-seat student`s table with adjustment of angle of inclination of table top and a shelf, height groups (No. 3-6) + T-shaped chair height-adjustable No. 3-6
Dimensions: 700х500х580-760 mm. Weight: 9,96 kg.
Overall dimensions of the table:
● width – 700 mm;
● depth – 500 mm;
● height – 580, 640, 700, 760 mm.
Wooden parts of the table are made of laminated chipboard of 16 mm thickness. Edges of all wooden elements are finished with PVC edge tape of 1 mm and 0.5 mm thickness. Metal parts of the table for pupils are made of flat-oval tubes of 50х30х1,2 mm, 38х20х1,2 mm, 30х15х1,2 mm and round tubes of 25 mm and 32 mm and also have a protective decorative coating - powder enamel. Height adjustment of the table for pupils is imlemented through end-to-end nut-screw stitching with fixation of cover nut inside the tube for impossibility of unscrew in the course of shattering. Plastic tips are fixed at the ends of the frame to prevent injury to students and damage to the floor. On the lower part of metal frame there is hole through which marking of height groups can be seen while adjusting the height of the table. Color marking in accordance to the height groups is applied in the form of the circle of about 10 mm. Also the scale of marking of height groups is applied on the metal frame with the help of laser engraving. Adjustment of an angle of inclination of table top is implemented due to the mechanism similar to rostomat with obligatory presence of limiters for the safety of usage by pupils. The limiter represents itself a locking mechanism, with a convenient handle, which blocks unauthorized change of an angle of inclination of the table top. The table top can be set either at an angle or horizontally. Angles of inclination of the table top are the following: 0°, 3°, 5°, 7°, 9°, 12°, 14°, 16°. In the central part of the tabletop there is a pencil case and holes for a book holder. There is a hole for a glass with stationery (the diameter of the hole for the glass is 60 mm), which is protected by a plastic sleeve. There are plastic transitional bushings in the places where the table height and the angle of inclination of the table top are adjusted, which ensure smooth adjustment, eliminate creaks and scratches when adjusting the height and give an ergonomic, modern look.Chipboard color: grey, milky oak, jasmine, beech, yellow/lime, sakura/lavender.
Frame color: green (RAL6018), grey (RAL7035), yellow (RAL1018).
Dimensions of the chair: 385х435х700-820 mm. Weight: 4,59 kg.
Seat back size – 380х200 mm;
Seat size – 380х350 mm.
The chair can be adjusted in height: 340 mm (№3), 380 mm (№4), 420 mm (№5) and 460 mm (№6). It consists of overlaid seat, seat back and metal frame. The seat and the seat back are made of sloping-glued plywood of 8-9 mm thickness and are covered with colorless eco-friendly water-based varnish. The edges of the seat and the seat back have a radius of rounding to prevent injury. Metal frame is made of round tubes with diameter 25 mm and 32 mm. The seat back and the seat are fixed to the frame with the help of screws and nuts. Height adjustment of the chair is carried out with the help of screws and holes on the frame. The frame is covered with powder paint. Height adjustment is imlemented through end-to-end nut-screw stitching with fixation of cover nut inside the tube for impossibility of unscrew in the course of shattering. Plastic caps are fixed at the ends of the frame to prevent injury to students and damage to the floor. In the places of height adjustment there is a plastic transition sleeve, which ensures smoothness of adjustment, eliminates creaking and scratches while height adjustment. Fixation of seats and seat backs to the frame of chairs is implemented with the help of screws of special mushroom-type form and nuts of rounded form, which prevent injury and damage to the clothes. On the lower part of metal frame there is hole throgh which a marking of height groups can be seen while adjusting the height of the chair. Color marking in accordance to the height groups is applied in the form of the circle not less than 10 mm. Also the scale of marking of height groups is applied on the metal frame with the help of laser engraving.
Frame color: green (RAL6018), grey (RAL7035), yellow (RAL1018).
top of page
SKU: 31182+32182
₴3,654.00Price
Frame color
Chipboard color
bottom of page